LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2014 >> Viper Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Door >> Removal >> Removal

Module, Door: Removal: Removal

Fig 1: Driver Door Module
GC0156618Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the lower trim panel from the inside of the front door to access the Driver Door Module (1) (DDM). Refer to PANEL, DOOR TRIM, REMOVAL .
    Fig 2: Driver Door Module & Connectors
    GC0156514Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect each of the electrical connectors (2) from the connector receptacles of the door control module.
    Fig 3: Driver Door Module & Fasteners
    GC0156816Courtesy of CHRYSLER GROUP, LLC
  4. Remove the two screws (3) that secure the door control module to the front door hardware module carrier (1).
  5. Remove the door control module from the door hardware module carrier.
scientia non olet · About LEMON Manuals