LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2013 >> Viper Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Active Damping Control >> Removal >> Removal

Module, Active Damping Control: Removal: Removal

Fig 1: Active Damping Control Module, Wire Harness Connectors & Screws
GC0156609Courtesy of CHRYSLER GROUP, LLC
  1. Remove the trunk floor cover from the trunk pan.
  2. Disconnect and isolate the negative battery cable.
  3. Disconnect the wire harness connectors (2) and remove the three screws (3) from the Adaptive Damping Control Module (ADCM) (1) and remove from the mounting bracket.
scientia non olet · About LEMON Manuals