Section 1650 (Charging System): Specifications
WARNING: This page is about a different car, the 2012 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Generator, 2.5L | |
| Generator pulley ratio | 2.40:1 |
| Rating | 75 amps @ 500 rpm (min) to 120 amps @ 2, 000 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| Generator, 3.0L | |
| Generator pulley ratio | 2.70:1 |
| Rating | 75 amps @ 500 rpm (min) to 120 amps @ 2, 000 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - |
| Generator B+ terminal nut | 17 | - | 150 |
| Generator bolts | 47 | 35 | - |
| Generator stud (2.5L) | 24 | 18 | - |
| Generator stud (3.0L) | 7 | - | 62 |
| Generator stud nut | 47 | 35 | - |
| Generator upper air duct screws (2.5L) | 4 | - | 35 |
| RH lower splash shield bolts | 8 | - | 71 |
| Radial arm adapter nut | 9 | - | 80 |