LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> C/V >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Fold Stow >> Removal >> Removal

Module, Fold Stow: Removal: Removal

NOTE:

The third row fold and stow module is located in the 60 percent seat cushion pan. The following steps should be performed on the 60 percent seat only.

Fig 1: Seat Cushion Pan
GC0124802Courtesy of CHRYSLER GROUP, LLC
  1. Remove the 60 percent third row power folding seat. Refer to MOTOR, RECLINER, POWER FOLDING SEAT
  2. Remove the seat cushion and cover. Refer to COVER, SEAT CUSHION, FRONT, REMOVAL or COVER, SEAT CUSHION, STOW-N-GO, REMOVAL or COVER, SEAT CUSHION, QUAD, REMOVAL or COVER, SEAT CUSHION, STOW-N-GO, REMOVAL or COVER, SEAT CUSHION, REMOVAL .
  3. Remove the push-pin retainers (1) that secure the bracket (4) to the seat pan (2).
  4. Disconnect the electrical connectors (3) from the fold and stow module.
    Fig 2: Third Row Power Folding Seat Module
    GC0124803Courtesy of CHRYSLER GROUP, LLC
  5. Disengage the two retaining tabs (4) that secure the fold and stow module (1) to the bracket (3).
  6. Slide the fold and stow module (1) out of the bracket and disengage the two retaining pins (2).
scientia non olet · About LEMON Manuals