LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> C/V >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Door >> Removal >> Rear

Module, Door: Removal: Rear

Fig 1: Rear Door Control Module Screws
GC0124586Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim panel from the inside of the sliding rear door. Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Disconnect the electrical connectors (4) from each of the rear door control module (2) connector receptacles.
  4. Remove the two screws (1) that secure the module to the rear door hardware module carrier (3).
  5. Remove the rear door control module from the carrier.
scientia non olet · About LEMON Manuals