MODULE, Engine Control: Installation: Installation

Fig 1: Removing/Installing ECM

Courtesy of CHRYSLER LLC

1. Install ECM (3) on mounting bracket. Torque fastener to 10.7N.m (95 lbs. in.).
2. Connect both ECM electrical connectors (1).
   Fig 2: AIR INLET DUCT

   Courtesy of CHRYSLER LLC
3. Install air filter housing assembly (2). Refer to Engine/Air Intake System/BODY, Air Cleaner - Installation .
4. Connect vacuum hose (1).
5. Connect negative battery cable.
6. Install air inlet tube (3).
7. Reprogram ECM. See Electrical/Electronic Control Modules/MODULE, Engine Control - Standard Procedure .