LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2010 >> Caliber Express >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> PLUG, Glow >> Removal >> Glow Plugs

Glow Plugs

Fig 1: Identifying Quarter Turn Lock Tabs & Air Inlet Duct
GC0137828Courtesy of CHRYSLER LLC
  1. Release quarter turn lock tabs (1) and remove air inlet duct (2).
  2. Disconnect negative battery cable.
  3. Remove engine cover.
    Fig 2: Identifying Fuel Rail Pressure Regulator Harness Connector
    GC0138068Courtesy of CHRYSLER LLC
  4. Disconnect the fuel rail pressure sensor harness connector (2).
    Fig 3: Identifying Lock Tabs & Engine Wire Harness
    GC0137898Courtesy of CHRYSLER LLC
  5. Release the four lock tabs (1) position aside engine wire harness (2).
  6. Disconnect the glow plug four way harness connector.
    Fig 4: Identifying Glow Plug Harness Connectors
    GC0138479Courtesy of CHRYSLER LLC
  7. Disconnect glow plug harness connectors (1).
    Fig 5: Identifying Glow Plugs
    GC0138480Courtesy of CHRYSLER LLC
    NOTE: Clean the area around the glow plug of dirt and debris before removing.
  8. Remove glow plugs (1) from cylinder head.
scientia non olet · About LEMON Manuals