Set Conditions
- Set Condition:
The PCM detects that the Knock Sensor 1 input voltage is:
- above 4.0 volts
- less than or equal to 1.0 volt with engine RPM at or above 2200
- equal to 0.0 volts with engine RPM below 2200
The PCM detects that the Knock Sensor 1 input voltage is:
- above 4.0 volts
- less than or equal to 1.0 volt with engine RPM at or above 2200
- equal to 0.0 volts with engine RPM below 2200