LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Viper >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Antilock Brake >> Removal

Controller Antilock Brake: Removal

  1. Disconnect battery negative (-) terminal.
  2. Raise vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
  3. Remove left front tire and wheel assembly. (Refer to TIRES/WHEELS - REMOVAL)
  4. Remove access panel in forward portion of left front wheel well.
  5. Pull outward on connector lock and disconnect 24-way connector at CAB. See Fig 1.
    Fig 1: CAB Mounting
    GC0036294Courtesy of DAIMLERCHRYSLER CORP.
    1 - CONNECTOR LOCK
    2 - 24-WAY CONNECTOR
    3 - CAB MOUNTING SCREWS
  6. Disconnect pump/motor wiring harness connector at CAB. See Figure.
  7. Remove four CAB mounting bolts. See Fig 1.
  8. Slide CAB off HCU and remove.
scientia non olet · About LEMON Manuals