LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Durango 3.7 K >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System (Service Information) >> Sensor-Wheel Speed-Abs-Rear >> Removal >> Without Traction Control

Without Traction Control

Fig 1: Removing/Installing Rear Wheel Speed Sensor (Without Traction Control)
GC0011482Courtesy of DAIMLERCHRYSLER CORP.
  1. Raise the vehicle on a hoist.
  2. Disconnect the sensor wire harness.
  3. Remove the brake line mounting nut and remove the brake line from the sensor stud (2).
  4. Remove the mounting stud (2) from the sensor (1) and shield.
  5. Remove the sensor (1) and shield from the differential housing (3).
scientia non olet · About LEMON Manuals