LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Durango 3.7 K >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System (Service Information) >> Sensor-Wheel Speed-Abs-Rear >> Installation >> With Traction Control

With Traction Control

Fig 1: Removing/Installing Rear Wheel Speed Sensor (With Traction Control)
GC0011481Courtesy of DAIMLERCHRYSLER CORP.
  1. Insert the wheel speed sensor (4) in the brake caliper adapter (2).
  2. Install the sensor mounting bolt (1) and tighten to 24 N.m (200 in. lbs.).
  3. Reconnect the electrical wiring connector (3) to the sensor (4).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals