LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1998 >> Durango 5.9 Z, Part Time >> Repair and Diagnosis >> Steering >> Power Steering System - Recirculating Ball >> Overhaul >> Spool Valve >> Disassembly

Spool Valve: Disassembly

  1. Remove lock nut.
  2. Remove adjuster nut with Spanner Wrench (C-4381).
  3. Remove thrust support assembly out of the housing.
  4. Pull stub shaft and valve assembly from the housing.
  5. Remove stub shaft from valve assembly by lightly tapping shaft on a block of wood to loosen shaft. Then disengage stub shaft pin from hole in spool valve and separate the valve assembly from stub shaft.
  6. Remove spool valve from valve body by pulling and rotating the spool valve from the valve body.
  7. Remove spool valve O-ring and valve body teflon rings and O-rings underneath the teflon rings.
  8. Remove the O-ring between the worm shaft and the stub shaft.
scientia non olet · About LEMON Manuals