LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1982 >> Ram 50 Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Cruise Control Systems (Domestic) >> Testing >> Brake Switch

Brake Switch

  1. Disconnect double connector at switch pigtail and connect a 12 volt source to either terminal, then connect a test lamp from other terminal to ground.
  2. Test lamp should light with brake pedal in normal position. If switch is correctly adjusted, test lamp light should go out when brake pedal is depressed a maximum of 1/2" (13 mm).
scientia non olet · About LEMON Manuals