Removal And Installation: AWD

REMOVAL 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Remove the tire and wheel assembly. Refer to TIRES AND WHEELS. REMOVAL AND INSTALLATION .
3. Remove the front crossmember. Refer to CROSSMEMBER, FRONT SUSPENSION, REMOVAL AND INSTALLATION .
4. Remove the stabilizer bar bracket fasteners.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Stabilizer Bar Bracket Fasteners

5. Remove the stabilizer bar brackets.
6. Remove the stabilizer bar from the front crossmember.
7. Remove the stabilizer bar bushings from the stabilizer bar.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• Install the stabilizer bar bracket fasteners. Tighten the stabilizer bar bracket fasteners to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .