LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Front Axle) >> Assembly >> Differential/Ring Gear Assembly

Differential/Ring Gear Assembly

WARNING: This page is about a different variant/trim than selected.
GC0081432Courtesy of CHRYSLER GROUP, LLC
  1. Install pinion shaft (1), pinion gears (3) and thrust washers (2).
    GC0081431Courtesy of CHRYSLER GROUP, LLC
  2. Using suitable punch, install new  roll pin and install flush to differential case (1).
    GC0081430Courtesy of CHRYSLER GROUP, LLC
  3. Install differential side gears (2) and thrust washers (1). Rotate into position.
    GC0094988Courtesy of CHRYSLER GROUP, LLC
  4. Using Installer (special tool #9666, Installer, Bearing) (1), install new  differential side bearing (ring gear side).
    GC0081440Courtesy of CHRYSLER GROUP, LLC
  5. Using Installer (special tool #9665, Installer, Bearing) (1), install new  differential side bearing (opposite side).
scientia non olet · About LEMON Manuals