LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 1438 (Electronic Control Modules (Service Information) - 1500) >> Module, Fuel Pump Control >> Installation

Module, Fuel Pump Control: Installation

WARNING: This page is about a different car, the 2017 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
GC0154484Courtesy of CHRYSLER GROUP, LLC
  1. If removed, reposition the heat shield (3) onto the fuel pump control module mounting studs.
  2. Install the fuel pump control module (2). Tighten the nuts (4) to 10 N.m (89 in. lbs.).
  3. Connect the electrical connector (1) to the module.
  4. Lower the vehicle.
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals