Diesel Engine

Fig 1: Radiator To A/C Condenser Mounting (Left Mount Shown; Right Similar)

Courtesy of CHRYSLER LLC

1 - SCREW - A/C CONDENSER SIDE BRACKET TO RADIATOR

2 - LOWER MOUNT

3 - A/C CONDENSER

Disconnect negative cable from battery.
Remove radiator upper crossmember support. Refer to CROSSMEMBER, RADIATOR, UPPER .
Do not remove the cylinder block plug or the radiator draincock with the system hot and under pressure because serious burns from coolant can occur.
Drain the cooling system.
Remove radiator fans. Refer to REMOVAL .
Disconnect coolant bypass hose.
Disconnect upper and lower hoses from the radiator.
Remove the A/C condenser side brackets to radiator attaching screws. Separate the condenser from the radiator by lifting upward to disengage from lower mounts. Allow the condenser to rest in front of radiator.
Radiator can now be lifted free from engine compartment. Care should be taken not to damage radiator cooling fins or water tubes during removal.