LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Restraints System (Service Information)) >> Occupant Restraint Controller >> Removal

Occupant Restraint Controller: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: REMOVING/INSTALLING OCCUPANT RESTRAINT CONTROLLER (ORC)
GC0043801Courtesy of DAIMLERCHRYSLER CORP.
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  3. Remove the center console (Refer to BODY/INTERIOR/CENTER CONSOLE - REMOVAL) .
  4. Remove Occupant Restraint Controller (ORC) mounting screws (1).
  5. Disconnect the two ORC 32-way connectors (3).
  6. Remove ORC (2) from vehicle.
scientia non olet · About LEMON Manuals