LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Ignition Control) >> Ignition Coil >> Removal

Ignition Coil: Removal

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the fuel pressure, refer to .
  2. Disconnect the negative battery cable.
  3. Remove the air cleaner assembly, refer to for more information.
  4. Remove the Intake Manifold, refer to for more information.
  5. Unlock and disconnect the electrical connector at the ignition coils. See Fig 1 and Fig 2.
    Fig 1: Front Coil Electrical Connector
    GC0006174Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Rear Coil Electrical Connector
    GC0006175Courtesy of DAIMLERCHRYSLER CORP.
  6. Twist and remove the ignition cables from the ignition coil.
  7. Remove the 4 bolts. See Fig 3.
    Fig 3: Ignition Coils
    GC0006173Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove ignition coil.
scientia non olet · About LEMON Manuals