LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Anti-Lock Brake System (Service Information)) >> Tone Wheel >> Installation

Tone Wheel: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tone wheel to the hub/bearing with a thin bead of silicone around the tone wheel.
  2. Tap the tone wheel down with a soft hammer until seated.
  3. Install the hub/bearing (DRW) (Refer to DIFFERENTIAL & DRIVELINE/REAR AXLE/AXLE BEARINGS - INSTALLATION) .
scientia non olet · About LEMON Manuals