2.7L Engine (Service Information): Mount-Rear: Installation

Fig 1: Removing Transmission Mount Bolts

Courtesy of DAIMLERCHRYSLER CORP.

1. Install mount to transmission bolts (2) and tighten to 47 N.m (35 ft.lbs.).
   Fig 2: Locating Transmission Mount, Crossmember and Bolts

   Courtesy of DAIMLERCHRYSLER CORP.
2. Install cross member (1) and attaching bolts. Tighten bolts to 68 N.m (50 ft.lbs.).
3. Lower transmission so cross member to mount bolts (2) can be started tightened by hand.
4. Lower transmission and remove jack.
5. Tighten mount bolts (2) to 47 N.m (39 ft.lbs.).