2.7L Engine (Service Information): Mount-Left: Installation

Fig 1: Mount Removal

Courtesy of DAIMLERCHRYSLER CORP.

1. Install engine mount isolator (1) in place.
   Fig 2: Left Mount Adapter

   Courtesy of DAIMLERCHRYSLER CORP.
2. Attach left engine mount isolator (1) to engine mount adapter (2). Install bolts and tighten to 75 N.m (55 ft. lbs.).
3. Lower engine but do not do not let mount contact frame.
4. Install engine mount studs and tighten to 12 N.m (106 in. lbs.).
   Fig 3: Locating Engine Mount Bolts, Drain Plug And Filter

   Courtesy of DAIMLERCHRYSLER CORP.
5. Lower engine and remove lifting device.
6. Tighten engine mount isolator nuts (1) to 75 N.m (55 ft. lbs.).
   Fig 4: Lower Splash Shield

   Courtesy of DAIMLERCHRYSLER CORP.
7. Install lower splash shield (2) and tighten retaining bolts (1).
8. Lower vehicle.
   Fig 5: Air Cleaner Housing

   Courtesy of DAIMLERCHRYSLER CORP.
9. Install air cleaner housing assembly (3) (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION) .
   Fig 6: Locating Battery

   Courtesy of DAIMLERCHRYSLER CORP.
10. Connect negative battery (1) cable.