2.7L Engine (Service Information): Arms-Rocker: Installation

Fig 1: Rocker Arm Components

Courtesy of DAIMLERCHRYSLER CORP.

1. Lubricate rocker arms with clean engine oil before installation.
2. Rotate engine until cam lobe is on its base circle (heel) of rocker arm being installed.
   Fig 2: Rocker Arm - Removal/Installation - 2.7L

   Courtesy of DAIMLERCHRYSLER CORP.
3. Using Special Tools 8215-A (1), 8216-A adaptor (2), and a 3/8" Drive Ratchet (3), depress valve spring only enough to install rocker arm.
4. Install rocker arm in original position (if reused) over valve and lash adjuster. Release tension on valve spring.
   NOTE: Inspect rocker arm for proper engagement into lash adjuster and valve tip.
5. Repeat procedure for each rocker arm being installed.
6. Install cylinder head cover(s). Refer to INSTALLATION .