Specifications Index
SEBRING CONVERTIBLE, SEBRING SEDAN & STRATUS SEDAN SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service & Torque | HEATING-A/C SYSTEM | ||
| Axle Nut/Hub Nut | |||
| Front | 110 Ft. Lbs. (150 N.m) | ||
| Rear | 185 Ft. Lbs. (250 N.m) | ||
| Battery | BATTERY SPECIFICATIONS | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | STANDARD PROCEDURE - ANTILOCK BRAKE SYSTEM BLEEDING | ||
| Without ABS | STANDARD PROCEDURE - BASE BRAKE BLEEDING | ||
| Disc Brakes | SPECIFICATIONS AND LIMITS | ||
| Drum Brakes | STANDARD PROCEDURE - BRAKE DRUM MACHINING | ||
| Torque | SPECIFICATIONS | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | TORQUE | ||
| Drive Belts | |||
| Adjustment | STANDARD PROCEDURE - CHECKING ACCESSORY DRIVE BELT TENSION - 2.7L | ||
| Belt Routing | |||
| 2.0L/2.4L | INSTALLATION - 2.0L/2.4L | ||
| 2.7L | INSTALLATION - 2.7L | ||
| Engine Cooling | |||
| General Service Specifications | N/A | ||
| Radiator Cap Pressure | 14-18 psi | ||
| Thermostat R & I | ENGINE COOLANT THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| 2.0L | |||
| Compression | CYLINDER COMPRESSION PRESSURE TEST | ||
| Oil Pressure | 4 psi at idle, 25-80 at 3000 RPM | ||
| Overhaul | OVERHAUL - 2.0L DOHC - EXCEPT COUPE | ||
| Torque | TORQUE | ||
| 2.4L | |||
| Compression | CYLINDER COMPRESSION PRESSURE TEST | ||
| Oil Pressure | 4 psi at idle, 25-80 at 3000 RPM | ||
| Overhaul | OVERHAUL - 2.4L DOHC - EXCEPT COUPE | ||
| Torque | TORQUE | ||
| 2.7L | |||
| Compression | CYLINDER COMPRESSION PRESSURE TEST | ||
| Oil Pressure | 5 psi at idle, 45-105 psi at 3000 RPM | ||
| Overhaul | OVERHAUL - 2.7L DOHC - EXCEPT COUPE | ||
| Torque | TORQUE | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Drive Plate/Flex Plate Torque | 70 Ft. Lbs. (95 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | FUEL PUMP MODULE | ||
| Pressure Specification | 58 psi +/- 5 psi | ||
| Fuel Pressure Test Procedure | SYMPTOM: *CHECKING FUEL DELIVERY | ||
| Fuel Pressure Release Procedure | STANDARD PROCEDURE - FUEL SYSTEM PRESSURE RELEASE PROCEDURE | ||
| Ignition | |||
| Firing Order | |||
| 2.0L/2.4L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 2.7L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | SPARK PLUG CABLE RESISTANCE | ||
| Ignition Wires (Routing) | REMOVAL - 4 CYLINDER | ||
| Spark Plugs | SPARK PLUG | ||
| Starting | |||
| Starter | N/A | ||
| Torque | SPECIFICATIONS - TORQUE | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT | ||
| Torque | Front FRONT SUSPENSION FASTENER TORQUE Rear FASTENER TIGHTENING SPECIFICATIONS |
||
| Wheel & Tire | |||
| Lug Nut Torque | 100 Ft. Lbs. (135 N.m) | ||