Installation - 2.4L

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

The knock sensor threads into the side of the cylinder block in front of the starter. See Fig 1.

Install knock sensor. Tighten knock sensor to 10 N.m (7 ft. lbs.) torque. Over or under tightening effects knock sensor performance, possibly causing improper spark control.
Attach electrical connector to knock sensor.

Fig 1: Knock Sensor - 2.4L

Courtesy of DAIMLERCHRYSLER CORP.

1 - GENERATOR

2 - INTAKE MANIFOLD

3 - KNOCK SENSOR

4 - STARTER