Fuel Injection: Specifications: Torque
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| MAP SENSOR 4-CYLINDER | 4.5 | 40 | |
| MAP SENSOR 2.7L | 4.5 | 40 | |
| POWER STEERING RESERVOIR PLASTIC MANIFOLD | 537 | 50 | |
| POWER STEERING RESERVOIR ALUMINUM MANIFOLD | 11.9 | 105 | |
| THROTTLE CABLE BRACKET 4-CYLINDER | 14.1 | 125 | |
| THROTTLE CABLE BRACKET 2.7L | 13.6 | 120 | |
| THROTTLE BODY BOLTS 4-CYLINDER | 13.6 | 120 | |
| THROTTLE BODY BOLTS 2.7L | 13.6 | 120 | |
| LOWER SUPPORT BRACKET 2.7L | 31.1 | 23 | |
| O2 Sensors | 27 | 20 | |
| The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws available for repair. They require a higher torque than the original screws. | |||