LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Seat System) >> Bench Seat Back >> Installation

Bench Seat Back: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.
  1. Install the seat back.
  2. Install the shoulder bolts attaching the seat back hinge to the seat back frame and tighten to 34 N.m (25 ft. lbs.) torque.
  3. Connect the synchronizing cable end from (clip on left side) hinge latch release arm, if equipped.
  4. Connect the synchronizing cable housing to the seat back hinge, if equipped.
  5. Install the upper hinge cover. (Refer to BENCH SEAT BACK HINGE  )
  6. Install the armrests, if equipped. (Refer to ARMREST  )
  7. Install the headrest sleeves. (Refer to HEADREST SLEEVE  )
  8. Adjust synchronizing cable, if equipped. (Refer to SYNCHRONIZING CABLE ADJUSTMENT  )
scientia non olet · About LEMON Manuals