LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Hood) >> Latch Release Cable/ Handle Assembly >> Installation

Latch Release Cable/ Handle Assembly: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Route the cable/handle assembly through the cowl panel and install the grommet.
  2. Position the handle onto the instrument panel bracket and tighten the screws.
  3. Route the cable along the fender rails and install the three push pin fasteners.
  4. Install the latch. (Refer to INSTALLATION  )
  5. Install the battery tray. (Refer to BATTERY TRAY )
scientia non olet · About LEMON Manuals