LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Lubrication >> Checking Fluid Level >> AWD Power Transfer Unit

AWD Power Transfer Unit

  1. Raise vehicle on hoist.
  2. Remove PTU inspection plug. See Fig 1.
  3. Fluid level should be within 3/16" from bottom of inspection hole.
  4. Add Mopar® Gear and Axle Lubricant 80W-90 as necessary with suitable suction gun.
  5. Install inspection plug and torque to 20 N.m (180 in. lbs.) torque.
  6. Lower vehicle.
Fig 1: Locating Power Transfer Unit Inspection Plug
G00379675Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals