LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Antilock Brake System) >> RWAL Valve >> Installation

RWAL Valve: Installation

WARNING: This page is about a different car, the 2002 Dodge Ram Wagon and 2002 Dodge Ram Van. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position rear antilock valve on the valve bracket.
  2. Install the mounting bolt and tighten to 24 N.m (18 ft. lbs.).
  3. Install the brake lines and tighten to 15 N.m (130 in. lbs.).
  4. Connect valve wiring harness to the controller.
  5. Connect the horn connector and install the access cover and mounting bolts.
  6. Install the extension panel.
  7. Install left turn signal housing.
  8. Fill and bleed base brakes system. (Refer to STANDARD PROCEDURE - BLEEDING ABS BRAKE SYSTEM  ).
scientia non olet · About LEMON Manuals