Front Wheel Speed Sensor (WSS): Removal
- Raise and support vehicle. Remove front wheel. Remove bolt and grommet retaining clip from fender shield. See Figure .
- Carefully pull front WSS wiring harness grommet from fender shield. Disconnect electrical connector for front WSS. Remove front WSS wiring harness bracket from front strut assembly.CAUTION: If front WSS is stuck in steering knuckle, use a hammer and soft drift to lightly tap on each side of WSS near bolt area to rotate WSS back and forth until WSS can be removed. DO NOT use pliers to pull WSS from steering knuckle.
- Remove front WSS-to-steering knuckle bolt. Carefully remove front WSS from steering knuckle.