Test 14C - Main Relay/Power Circuit Failure
NOTE:
Ensure DRB is NOT in TEVES ABS diagnostic mode in this test.
- Perform several ABS stops and traction control starts. Inspect ABS fuse. If fuse is okay, system is operating properly at this time. Perform TEST VER-1A. If fuse is open, go to next step.
- Inspect wiring harness between ABS relay and CAB for damage. If wiring harness is faulty, repair as necessary. Perform TEST VER-1A. If wiring harness is okay, replace HCU. Perform TEST VER-1A.