LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1987 >> Conquest 2.6 N >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Neutral Safety Switch >> Conquest

Neutral Safety Switch: Conquest

  1. Place transmission in Neutral. Remove screw on bottom of neutral safety switch at transmission. Loosen attaching bolts. See Fig. 12.
  2. Using an .08" (2.0 mm) alignment pin, move switch until pin falls into hole in rotor. Tighten attaching bolts to 43-61 INCH lbs. (5-7 N.m).
scientia non olet · About LEMON Manuals