Removal Procedure
- Disable the SIR system. SIR Disabling and Enabling
Using a flat-bladed plastic trim tool, release the retaining clips.
- Rear Side Door Sill Garnish Molding (1) - Remove
Body Lock Pillar Upper Trim Panel Bolt Hole Plug (1) - Remove
- Quarter Upper Trim Panel Bolt (2) - Remove
- Quarter Upper Trim Panel (3) - Reposition
Quarter Window Trim Finish Panel Bolt Cap Body Rear Corner Upper Garnish Molding Cap (1) - Remove
- Body Rear Corner Upper Garnish Molding Bolt (2) - Remove
- Body Rear Corner Upper Garnish Molding (3) - Reposition
Cargo Tie Down Loop Trim Cover (1) - Remove [2x]
- Cargo Tie Down Loop Bolt (2) - Remove [2x]
- Cargo Tie Down Loop (3) - Remove [2x]
Load Floor Trim Panel (1) - Remove
Rear Compartment Floor Panel Front Trim (1) - Remove
Rear Compartment Floor Stowage Compartment Divider Retainer (1) - Remove [4x]
- Rear Compartment Floor Stowage Compartment Divider (2) - Remove
Liftgate Lock Striker Cover (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Rear End Trim Finish Panel (1) - Remove
Quarter Lower Rear Trim Panel- Left Side (1) - Remove
- Disconnect the electrical connector.
- NOTE:
Some components not shown for graphic clarity.
Rear Seat Belt Retractor Bolt (1) - Remove
- 3rd Row Seat Belt Retractor Bolt (2) - Remove [2x]
- 3rd Row Seat Belt Retractor (3) - Remove