Installation Procedure
WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
- Wheel Speed Sensor (1) - Install
- Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)CAUTION:
- Retainer (1) @Steering Knuckle - Secure
- { F45 }Wiring Harness (2) @Retainer (1) - Install
- Wiring Harness Grommet (1) - Install [2x]
- Retainer (1) @Side Rail - Secure [2x]
- { F45 }Wiring Harness (2) @Retainer (1) - Install
- Retainer (1) @Radiator Support - Secure
- Wheel Speed Sensor Electrical Connector - Connect
- Install the appropriate front wheelhouse liner. Front Wheelhouse Liner Replacement
- Verify the repair is complete. Diagnostic Repair Verification