LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse L >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle >> Repair Instructions >> Rear Differential Clutch Control Module Replacement >> Installation Procedure

Installation Procedure

  1. GM4294894

    Position the clutch control module (1) onto the rear axle.

  2. GM4294891

    Reconnect the electrical connector (1) to the clutch control module.

  3. GM4294890
    CAUTION:

    Refer to Fastener Caution .

    NOTE:

    Apply loctite before installing bolts.

    Install the clutch control module bracket bolts (1). Tighten to 6 N.m (53 lb in).

  4. Install the rear drive axle assembly. Differential Carrier Assembly Replacement 
  5. Remove the support and lower the vehicle.
  6. Reprogram the K47 clutch control module. Control Module References
scientia non olet · About LEMON Manuals