LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Suburban 3500 HD LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Antilock Brake System) >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction >> Component Testing

Component Testing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 GMC Yukon XL, 2017 GMC Yukon, 2017 Chevrolet Tahoe, 2017 Chevrolet Suburban, and 2017 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X1 harness connector at the S48A Multifunction Switch - Instrument Panel.
  2. Test for infinite resistance between the signal circuit terminal 2 and the ground terminal 8 with the switch in the open position.
    • If less than infinite resistance 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If infinite resistance 
  3. Test for less than 2 Ω between the signal terminal 2 and the ground terminal 8 with the switch in the closed position.
    • If 2 Ω or greater 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals