Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Countershaft Bearing Assembly |
| Input Shaft Bearing Shim |
| Offset Shift Lever Rollpin |
| Shift Fork Retainer Ring |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Backup Lamp Switch | 27 N.m (20 lb ft) |
| Backup Lamp Switch Bracket Bolt | 9 N.m (80 lb in) |
| Concentric Slave Cylinder to Adaptor Plate Bolt | 12 N.m (106 lb in) |
| Concentric Slave Cylinder Pipe Bracket Bolt | 9 N.m (80 lb in) |
| Concentric Slave Cylinder Bleed Screw | 8 N.m (71 lb in) |
| Transmission Cooler Pipe Fitting | 18 N.m (13 lb ft) |
| Drain Plug (Transmission Oil) | 27 N.m (20 lb ft) |
| Extension Housing to Transmission Case Bolts | 48 N.m (35 lb ft) |
| Neutral Return Cam Spring Retaining Bolt | 25 N.m (18 lb ft) |
| Propshaft Transmission Yoke Nut | 136 N.m (100 lb ft) |
| Pump Outlet Cooler Fitting | 17 N.m (13 lb ft) |
| Reverse Idler Shaft Bracket Bolts | 25 N.m (18 lb ft) |
| Reverse Lockout Assembly Bolt | 18 N.m (13 lb ft) |
| Reverse Lockout Solenoid | 40 N.m (30 lb ft) |
| Shift Control Adapter Plate Bolt | 18 N.m (13 lb ft) |
| Shift Control Adapter Plate Nut | 12 N.m (106 lb in) |
| Shift Detent Assembly | 40 N.m (30 lb ft) |
| Shift Guide Plate Bolts | 22 N.m (16 lb ft) |
| Shift Lever Guide Bolts | 27 N.m (20 lb ft) |
| Shift Shaft Detent Plug | 24 N.m (18 lb ft) |
| Shifter Cover Plate | 20 N.m (15 lb ft) |
| Transmission Bolt | 48 N.m (35 lb ft) |
| Transmission Case Fill Plug | 27 N.m (20 lb ft) |
| Transmission Fluid Pump Outlet Pipe Fitting | 18 N.m (13 lb ft) |
| Transmission Case Plug | 18 N.m (13 lb ft) |
| Transmission Mount to Transmission Case Bolts | 60 N.m (44 lb ft) |
| Vehicle Speed Sensor (VSS) Bolt | 11 N.m (97 lb in) |
| Adapter Plate Plug | 27 N.m (20 lb ft) |
| Adapter Plate to Transmission Case Bolts | 48 N.m (35 lb ft) |
| Adapter Plate to Clutch Housing Bolts | 42 N.m (31 lb ft) |
| Transmission Close out Panel to Transmission Retaining Bolt | 14 N.m (124 lb in) |