LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> SS Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Diagnostic Information and Procedures >> Seat Belt Indicator Malfunction >> Component Testing

Component Testing

  1. Ignition OFF.
  2. Disconnect the harness connector at the B153 Seat Belt Buckle.
  3. B153 Seat Belt Buckle in the buckled position.
  4. Test for infinite resistance between the signal circuit terminal 1 and the ground terminal 2 at the B153 Seat Belt Buckle.
    • If there is not infinite resistance, replace the B153 Seat Belt Buckle
    • If there is infinite resistance
  5. B153 Seat Belt Buckle in the unbuckled position.
  6. Test for less than 1 Ω between the signal circuit terminal 1 and the ground terminal 2 at the B153 Seat Belt Buckle.
    • If 1 Ω or greater replace the B153 Seat Belt Buckle
    • If less than 1 Ω
  7. All OK.
scientia non olet · About LEMON Manuals