LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Diagnostic Information and Procedures >> Passenger Presence System Rezeroing >> Introduction

Passenger Presence System Rezeroing: Introduction

The Passenger Presence Module is a calibrated system that requires rezeroing anytime the seat cushion trim attachments have been removed or Passenger Presence Module has been replaced. The procedures below are designed to assist in the rezeroing of the Passenger Presence Module. Before you start, read these procedures carefully and completely. For further information regarding the Passenger Presence Module refer to SIR System Description and Operation .

NOTE:

The following procedures must be followed:

  1. Read this procedure carefully and completely.
  2. The Passenger Presence Module will not function properly if the Passenger Presence Module rezeroing procedure is not performed.
  3. Perform the Diagnostic Repair Verification after successfully completing the rezeroing procedure to ensure the system is functioning properly.
scientia non olet · About LEMON Manuals