Installation Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
- Position the water outlet (3) and a NEW seal (2), to the cylinder head.
- Install the 4 water outlet bolts (1) and tighten to 8 N.m (71 lb in).
- Connect the radiator inlet hose (1), the engine coolant air bleed hose (2) and the heater outlet hose (3), to the water outlet.
- Install the engine coolant temperature sensor (1) and the battery positive cable (3), to the A/C compressor hose (2).
- Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
- Fill the radiator coolant system. Refer to Cooling System Draining and Filling .
- Start the engine and check for coolant leaks.
CAUTION:
Refer to Fastener Caution .