LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Malibu LTZ, 3.6 7 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying MAP Sensor & ETC Electrical Connectors
    GM1838990Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the engine wiring harness electrical connector (2) from the electronic throttle control (ETC).
    3. Fig 2: View Of Throttle Body & Bolts
    GM1839345Courtesy of GENERAL MOTORS CORP.
  3. Remove the throttle body bolts.
  4. Remove the throttle body and gasket. Discard the gasket.
scientia non olet · About LEMON Manuals