LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Lower & Upper Steering Column Covers
    GM328807Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper and lower steering column trim covers. Refer to Steering Column Trim Cover Replacement (Manual)  or Steering Column Trim Cover Replacement (Telescoping) .
    2. Fig 2: View Of Wire Harness Straps & Steering Column Tilt Head Assembly
    GM323835Courtesy of GENERAL MOTORS CORP.
  2. Remove the wire harness straps (2) from the steering column tilt head assembly (1) and the column.
    3. Fig 3: View Of Steering Wheel Column Wire Harness & Wire Harness Straps
    GM323836Courtesy of GENERAL MOTORS CORP.
  3. Remove the wire harness assembly (1) from the wire harness strap (2).
    4. Fig 4: Identifying Pan Head Tapping Screws
    GM323837Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 pan head tapping screws (1).
    5. Fig 5: View Of Multifunction Turn Signal Switch Assembly
    GM323838Courtesy of GENERAL MOTORS CORP.
  5. Remove the multifunction turn signal switch assembly (1).
scientia non olet · About LEMON Manuals