LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Folding Top System) >> Repair Instructions >> Folding Top Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Folding Top Control Module & Electrical Connectors
    GM1509583Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors (1) to the folding top control module (2).
  2. Install the rear compartment carpet. Refer to Trim Panel Carpet - Rear Compartment Rear Center in interior Trim.
  3. Connect the battery. Refer to Battery Negative Cable Disconnect/Connect Procedure (7.0L) in Engine Electrical.
  4. Close the rear compartment.
  5. Inspect the folding top for proper operation. Refer to Power Folding Top Description and Operation .
scientia non olet · About LEMON Manuals