LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (HVAC Systems - Manual) >> Repair Instructions >> Temperature Control Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Temperature Control Cable At Temperature Door Lever
    GM894050Courtesy of GENERAL MOTORS CORP.
  1. Install the temperature control cable to the vehicle.
  2. Route the new cable in through the HVAC control assembly opening in the instrument panel (I/P). The cable housing flag goes to the HVAC control assembly end.
    1. Route the new cable in through the HVAC control assembly opening in the I/P.
    2. The cable housing flag goes to the HVAC control assembly end.
    3. Guide the cable around outside of the I/P support brace.
  3. Install the cable eyelet onto the temperature door lever pin.
  4. Install the right side console closeout panel.
  5. Install the HVAC control module. Refer to HVAC Control Assembly Replacement .
scientia non olet · About LEMON Manuals