LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Wheel Speed Sensor Replacement - Rear >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Wheel Speed Sensor Electrical Connector
    GM1255824Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Disconnect the rear wheel speed sensor electrical connector.
  4. Remove the rear hub unit from the knuckle assembly, because the wheel speed sensor is not serviceable separately. Refer to Wheel Bearing/Hub Replacement - Rear in Rear Suspension.
scientia non olet · About LEMON Manuals