LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Seat Adjuster & Bolts
    GM887230Courtesy of GENERAL MOTORS CORP.
  1. Position the front seat forward in order to gain access to the seat adjuster bolts (1).
  2. Remove the bolts (1) from the back of the adjuster (3).
  3. On the driver side disconnect the seat belt wiring harness.
  4. Disconnect the power seat electrical connector, if equipped.
  5. Place the seat back in a full recline position.
  6. Manually tilt the seat assembly at an angle to disengage the seat adjuster hooks adjuster from the floor pan.
  7. Remove the seat assembly from the vehicle.
scientia non olet · About LEMON Manuals