LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation, Overhaul >> Fuel Systems >> Fuel Level Sensor >> Installation

Fuel Level Sensor: Installation

Install the fuel level sensor by sliding the sensor down in the housing. Slide the upper reservoir into the lower reservoir. Connect the 2 wires into the connector and lock the connector with the retaining clip. Connect the fuel pump and fuel level sensor electrical connector and lock the connector with the retaining clip. Install the fuel sender assembly.

NOTE: Make sure the wires are routed under the fuel level sensor. Make sure the tab locks in place.
scientia non olet · About LEMON Manuals