LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Venture Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Service Information >> Removal & Installation >> Park/Neutral Position Switch >> Removal

Park/Neutral Position Switch: Removal

  1. Apply the parking brake. Block the wheels. Shift the transmission into Neutral. Remove the throttle body air inlet duct. Use a flat-blade tool in order to remove the shift cable from the manual control lever. See Fig 1 .
  2. Remove the electrical connectors. Remove the manual control lever. Remove the PNP switch bolts. See Figure . Remove the PNP switch.
Fig 1: Removing & Installing Shift Cable At PNP Switch
G00087760Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals