LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Anti-Lock Brake System) >> Removal & Installation >> Electronic Brake Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1997 GMC Safari and 1997 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery terminal. Disconnect harness connector from EBCM and combination valve. Remove 4 module retaining screws.
  2. To install, reverse removal procedure. DO NOT use RTV or any other type of sealant on EBCM gasket or mating surfaces.
scientia non olet · About LEMON Manuals